- Brand
- Maeltecnomat
- Made up of
- Stainless Steel
Machine built in AISI 304 stainless steel on a self-supporting frame, except for the friction zones which are made of food-grade plastic.
Functioning:
-Lid Placer:
It has an
infeed dispenser that will limit the access of the molds. Once the molds are in
the machine, a centering device will place them in the exact position for
receiving the lid. Next, a trolley system will collect the lids that are
located on a parallel conveyor, and with great precision it will place the lids
in the molds.
-Lid Remover:
It has an inlet dispenser that will limit the access of the
molds with a lid. Once the molds are in the machine, a centering device
will place them in the exact position for removing the lid. Next, a trolley system will collect
the lids from the molds and place them on a parallel conveyor, to send the
molds and lids separately to subsequent processes.
-Mold Turner:
Drum turner:
once the covers have been removed, the molds will be transferred to a body made
up of two conveyor belts which form a type of “sandwich”. After this
manoeuvre, a set of chains and cylinders will perform its function and will
give way at the end of the turning manoeuvre to the demoulding stations.
-Demolding
The Molds will
be introduced into the extraction hoods, and by means of compressed air the
cheese will slide and detach from the mold: you can proceed by removing the
mold and leaving the cheese on the belt, or by sending the cheese to a lower
belt after demolding, to lead it to the salting area.
The molds
will then be sent automatically in this same position to the washing machine.